weberjoint is a cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas.
weberjoint is water resistant, easy to apply, and can be cleaned easily. It is a thixotropic, crack-free, non-slump grout that only needs to be mixed with water. It is also available in a wide range of attractive colors (please consult our color chart board).
Surface of application
External floor, Floor, Roof, Wall
Features and benefits
Easy to apply and clean
Thixotropic Non-slump grouts
Water resistant
Non-shrink grout
Crack-free
Only need to be mixed with water
Large range of colors
Things to consider
Mixing water ratio as per the data sheet
weberjoint thin for joint width 1 to 4mm
weberjoint thick for joint width 4 to 8mm
Apply 24 hours minimum after standard tile adhesives application
Apply 4 hours minimum after fast-setting tile adhesives application
Apply 14 days minimum after tiling with traditional “site-mix” mortar on floors (minimum 3 days for walls)
Substrate must be fully cured, set and dry prior to grouting
All traces of oil or grease must be removed
All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
Avoid excess of water while cleaning to prevent discoloration of joints
It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts
Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application
Reviews
There are no reviews yet.