Description
Cement based dry ready mix plaster
weberpremix SP-1 is a cementitious ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives and fibers, it allows better shrinkage control as well as improved workability and curing. weberpremix SP-1 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up.weberpremix SP-1 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on light weight concrete blocks, it is recommended to use weberpremix SP-3 FL.
Do not apply under direct sun light and wind
Surface of application
Wall
Features and benefits
Easy to apply Well adapted to dried conditions High quality
Things to consider
- Recommended thickness between 10 and 20 mm in one layer, if more thickness is required, the application should be done in two layers
- A spatter dash slurry coat (weberpremix SRC-1, SRC-2 or SRC-S) should be applied as a key coat for improved bonding & adhesion of subsequent layers
- A few hours before the application of weberpremix SP-1, dampen the rush coat with clean water.
- Let the product set properly on the surface before any curing
- Not applicable on fair face concrete without rush coat weberpremix SP-1 should not be used on painted surfaces or floors.
Reviews
There are no reviews yet.